Description
Messer Know- how Your Smart Choice of manual Plasma Cutting
- Digital Controlled inverter based manual Plasma cutting Machine.
- Digitised Panel for setup & Control
- Extremely reliable IGBT Power modules Saves power Compared to conventional power sources.
- Digital display of the amperage for easy visibility even in dark places.
- Easily recognisable error code gives faster resolution of problems
- Wheel Mounted equipment for easy handling in Workshops & Sites.
- No Preheat process is required to cut conductive metals. Piercing can be done almost in 1 Second.
- 2 to 5 times higher cutting Speed than conventional Oxyfuel Cutting for steels (Depending on machine power &Plate thickness)
- Very easy to operate just connect to 3 Phase power, Compressed air& Start cutting.
- Superior cut quality means less grinding & easy edge preparation.
- Less dross & Superior Cut Quality
- Ideally suited for automobile industries, Foundry, Onsite/ Offsite maintenance department, Artwork, Designer workshops, Hobby shops &DIY Applications, rescue unites, Research labs, Fabrication shops, Scrap handling units, agricultural/ dairy equipments manufacturing, Garages & a long list of Imaginative Application, etc….
Starcut65/105
Technical data (Dimensions in mm)
| Specification | Starcut 65 | Starcut 105 | |
| Input Voltage | 3phase 415 Volts &50Hz | ||
| Output Current | 35- 65A | 35-105A | |
| Input Power(max Output 65A*150V) | 11.5KVA | 20KVA | |
| Machine principle | Digitally controlled IGBT Based Inverter | ||
| Open Circuit Voltage | 300 Vdc -330 Vdc | ||
| Cutting Torch Cooling | Air Cooled | ||
| Duty Cycle at 40°C (10Min) | 40% | ||
| Arc Ignition Type | With Pilot Arc | ||
| Dimension Length X Width X Height | 540mmX 360mmX670mm | ||
| Weight (Kgs) | 60 | 67 | |
| Recommended Cut Capacity without Pierce (mm) | 15 | 25 | |
| Reliable Pierce Capacity for manual cutting use (mm) | 9 | 16 | |
| Severance Cut Capacity (mm) | 20 | 45 | |
| Compressed Air requirement | Clean , Oil Free, Dry, Compressed Air 5.0 to 5.5 Bar @175 L /Min | ||
| Minimum Compressor Capacity & Tank Size | 1.5 hp with 300Liter Tank |
