The Fronius TransCut is a plasma cutting machine which does not, as is usual, use compressed air, but rather, a small amount of liquid. This liquid serves as a medium for the high-energy plasma beam, and makes the device lightweight and portable. A 230 V connection or a generator suffice as a power supply. The compact cutting device can be taken anywhere at any time, and is ready for use within a very short time.
Cutting with TransCut means”green cutting”. Toxic emissions are greatly reduced, by up to 90 %! This considerably improves the working environment. At the same time, Trans Cut reduces metal sparks and contamination of components. The cutting system cuts steel, chrome/nickel and aluminium. High quality cuts of up to 6 mm are possible.
| TransCut | |
|---|---|
| Mains voltage, single-phase + 10 % / ??15 % | 230 V |
| Mains fuse protection (slow-blow) | 16A |
| Cutting-current range | 16-30 A |
| Cutting Current | 35 % d.c: 30 A |
| 100 % d.c: 6 A | |
| Operating duration per tankful of fluid medium | 3 h |
| Protection | IP 23 |
| Dimensions l/w/h mm | 460x180x275 |
| Dimensions l/w/h (inches) | 18.11×7.09×10.83 |
| Weight | 14.6 kg |
