Fronius

Showing 10–18 of 24 results

• 

  MagicWave 4000 AC/DC TIG Inverter

  The Fronius MagicWave 4000 is a fully digitally controlled TIG AC/DC power source with ActiveWave technology, and is characterised by the softest possible yet highly stable arc. It has an output of 400 A, is both light and robust and self-explanatory in operation. The power source can be used in many different fields: chemical, container, machine and plant construction, pipeline construction, automotive and tracked vehicle manufacturing, aerospace industry and shipbuilding, as well as by all types of installation, maintenance and repair companies.
• 

  MagicWave 5000 AC/DC TIG Inverter

  The Fronius MagicWave 5000 is a fully digitally controlled TIG AC/DC power source with ActiveWave technology, and is characterised by the softest possible yet highly stable arc. It has an output of 500 A, is both light and robust and self-explanatory in operation. The power source can be used in many different fields: chemical, container, machine and plant construction, pipeline construction, automotive and tracked vehicle manufacturing, aerospace industry and shipbuilding, as well as by all types of installation, maintenance and repair companies.
• 

  TIME 5000 Digital

  TIME 5000 Digital, a digitised high-performance welding process with all the associated benefits: 100 % reproducible welding results, modular system principle, digital microprocessor control and outstanding weld properties.
• 

  Trans Process Solution: TPS/i

  Fronius TPSI is an all new MIG/MAG welding appliance platform –  leading the industry into a new era. The TPS/i transcends or shifts the boundaries that previously applied. With it, users benefit from using individually customisable appliances that can also be subsequently upgraded and that stand out for their high intelligence and extensive communications functions. This makes the appliances easier to operate, multi-functional and able to deliver virtually limitless performance.
• 

  TransCut

  The Fronius TransCut is a plasma cutting machine which does not, as is usual, use compressed air, but rather, a small amount of liquid. This liquid serves as a medium for the high-energy plasma beam, and makes the device lightweight and portable. A 230 V connection or a generator suffice as a power supply. The compact cutting device can be taken anywhere at any time, and is ready for use within a very short time. Cutting with TransCut means”green cutting”. Toxic emissions are greatly reduced, by up to 90 %! This considerably improves the working environment. At the same time, Trans Cut reduces metal sparks and contamination of components. The cutting system cuts steel, chrome/nickel and aluminium. High quality cuts of up to 6 mm are possible.
• 

  TransPocket 125-10VRD MINE-Spec

  A spate of serious welding accidents including some fatal electrocutions has resulted in the mining industry banning certain types of welding equipment and even more stringent safety measures being imposed. The mining industry backed by the WTIA (Welding Technology Institute of Australia) – is demanding that welding equipment be made safer and conform to even more stringent safety regulations to minimise potential accidents and injury in the future. Fronius is taking a proactive approach with its latest Mine-Spec machine, Weighing just 4.7 kg, Voltage Reduction Device (VRD) – TransPocket 125-10 is the most compact MMA welder in the Fronius range. The Fronius TransPocket 125-10 VRD was the only VRD machine that currently meets the new mine OH&S specifications making it the safest MMA machine on the market in Australia. Take the safety critical aspect of open circuit voltage (OCV). Australian standards demand a maximum of 35V OCV at the electrode when a MMA VRD machine is not welding. The Fronius TP125-10 VRD is 12V three times lower than the standard. When the welding circuit resistance is greater than 200 ohms (for example when touching the human body) the OCV is limited to 12V and the VRD must be active within 0.3 seconds after welding stops. The software that controls the machine is designed to put the machine in fault mode if the VRD is not working, hence the TP125-10VRD Mine-Spec machine is deemed to be “Fail to Safe””. Unlike other VRD alternatives, there is no need to continually hold down buttons when you are welding which adds to operator fatigue. The braided heavy-duty input power cable gives extra strength and protection. An earthed braided cable is recommended for all applications where OH & S ‘Duty of Care’ is essential.”
• 

  TransPocket 1500

  The TransPocket 1500 is a fully digitally controlled manual electrode welding machine with resonant intelligence. The ideal characteristic ensures the arc is always stable, even with long mains leads of up to 100 metres or fluctuating mains voltages.
• 

  TransPocket 1500 TIG Kit

  The Fronius TransPocket 1500 is a fully digitally controlled manual electrode welding machine with resonant intelligence. The ideal characteristic ensures the arc is always stable, even with long mains leads of up to 100 metres or fluctuating mains voltages. The Fronius TransPocket 1500 TIG is guaranteed to weld all electrode types up to 4 mm including the vertical-down welding of cellulose electrodes. The welding machine is equipped with a remote control connection, and can therefore be controlled directly on-site. Perfect TIG welding up to 150 A thanks to extra TIG functions, e.g. TIG Comfort Stop.
• 

  TransPuls Synergic 2700

  The TransPuls Synergic 2700 for short circuit, spray and pulsed arcs is a fully digitised and microprocessor-controlled MIG/MAG power source with an output of 270 A. The power source gives the best weld properties in every respect, and reproducible results time and time again. The integral wire-feed unit guarantees portable use on construction sites, in workshops and for maintenance and repair activities. The multiprocess power source is suitable for MIG/MAG, TIG and electrode welding.