Nickle

Showing 1–9 of 29 results

  • EXATON 16.5.1

    16.5.1 is a filler material for joining EN 1.4418 and similar steels. It is also used for overlay welding. The weld metal has excellent resistance to cavitation and is used typically for shafts, propellers, pumps and valves in for example,...

  • EXATON 22.12.HT

     Exaton 22.12.HT is an austenitic filler material for welding the high temperature steel grade Sandvik 253 MA*, UNS S30815. It is characterized by high creep strength, good resistance to oxidation and good weldability. It is used for MIG/MAG welding.

  • EXATON 2209

     2209 is used for welding of duplex stainless steels such as 2205 and 2304. It can also be used for welding of duplex stainless steels to carbon steel. It is used for MIG/MAG welding.

  • EXATON 2209LSI

    2209LSi is designed for gas shielded arc welding and particularly MIG welding of duplex stainless steels, such as 2205 and 2304. Its corrosion resistance is equal to ASTM 904L in most applications. It combines high strength with excellent ductility. 2209LSi...

  • EXATON 25.22.2.LMN

    25.22.2.LMn is a manganese alloyed chromium-nickel-molybdenum filler material used for welding UNS S31050 or 1.4466, UNS S31603, 1.4435. The weld deposit has excellent low temperature toughness that makes it suitable for joining stainless steels for cryogenic service. It is used...

  • EXATON 2594

     2594 is used for welding of 2507 and other super-duplex steels. The grade is characterized by excellent resistance to stress corrosion in chloride-bearing environments and excellent resistance to pitting and crevice corrosion. 2594 can also be used for welding 2205 and...

  • EXATON 27.7.5.L

    Exaton 27.7.5.L is a hyper-duplex (austenitic-ferritic) filler metal with improved yield strength and better pitting and crevice corrosion resistance compared to super-duplex stainless steels (UNS S32750 and S32760). It also has higher HISC (hydrogen induced stress cracking) resistance compared to...

  • EXATON 29.8.2.L

    29.8.2.L is used for MIG/MAG welding of the super-duplex grade Sandvik SAF 2906. Typical applications are welding of piping systems in Caustic soda production as well as welding of pipes and heat ex-changers in Alumina production.

  • EXATON 308/308L

     308/308L is used for MIG/MAG welding, and is suitable for joining stainless steels of the 18Cr/8Ni/ELC and 18Cr/8Ni/Nb types for service temperatures up to 350°C (660 F). 308/308L is approved by TÜV-Rheinland for use at cryogenic temperatures down to 4°K...