Description
Typical Tensile Properties
| Condition | Elongation | Tensile Strength | Yield Strength |
| As Welded | 35 % | 660 MPa (96 ksi) | 420 MPa (61 ksi) |
Recommended Welding Parameters
| Current | Voltage | Wire Diameter | Wire Feed Speed | |
| 40-120 A | 15-19 V | 0.8 mm (0.030 in.) | 4.0-8.0 m/min (157-315 in./min) | |
| 60-220 A | 15-28 V | 1.0 mm (0.040 in.) | 4.0-12.0 m/min (157-472 in./min) | |
| 150-260 A | 24-29 V | 1.2 mm (0.047 in.) | 3.0-10.0 m/min (118-394 in./min) | |
| 230-350 A | 25-30 V | 1.6 mm (1/16 in.) | 3.0-5.0 m/min (118-197 in./min) | |
Classifications
| Wire Electrode | SFA/AWS A5.14 : ERNiCr-3 EN ISO 18274 : S Ni 6082 (NiCr20Mn3Nb) |
Approvals
| Approvals | CE EN 13479 VdTÜV 00073 |
| Approvals are based on factory location. Please contact ESAB for more information. |
Typical Weld Metal Analysis %
| Typical Wire Composition % | |||||||||||||||
| Al | C | Co | Cr | Cu | Fe | Mn | Mo | N | Nb | Nb+Ta | Ni | P | S | Si | Ti |
| 0.4 % | <=0.03 % | <=0.1 % | 20.0 % | <=0.05 % | <=1 % | 3 % | ≤0.05 % | <=0.05 % | 2.5 % | 2.6 % | 73 % | <=0.01 % | <=0.01 % | 0.1 % | 0.4 % |
| Typical Weld Metal Analysis % | |||||||||||||||
| – | <0.02 % | <0.02 % | 20 % | 0.01 % | ≤1 % | 3.2 % | 0.01 % | 0.03 % | 2.2 % | 2.5 % | 73 % | <0.003 % | 0.003 % | 0.01 % | 0.4 |
