EXATON NICRMO-14

NiCrMo-14 is a nickel-chrome-molybdenum alloy of type alloy 686 and is the highest alloyed of all Ni-Cr-Mo alloys. NiCrMo-14 is used for joining nickel alloy such as UNS N06022 (2.4602), UNS N06059 (2.4605), UNS N10276 (2.4819) and super duplex. The material…

Category:

Description

Typical Charpy V-Notch Properties

Impact Value Testing Temperature
As Welded
75 J (56 ft-lb) -196 degC (-321 degF)
110 J (81 ft-lb) 20 degC (68 degF)

Typical Tensile Properties

Condition Elongation Tensile Strength Yield Strength
As Welded 41 % 815 MPa (118 ksi) 565 MPa (82 ksi)

Recommended Welding Parameters

Current 150-260 A
Voltage 24-29 V
Wire Diameter 0.047 in.
Wire Diameter 1.2 mm
Wire Feed Speed 118-394 in./min
Wire Feed Speed 3.0-10.0 m/min

Classifications

Wire Electrode SFA/AWS A5.14 : ERNiCrMo-14
EN ISO 18274 : S Ni6686 (NiCr21Mo16W4)

Approvals

Grade EN 13479
Society CE
Approvals are based on factory location. Please contact ESAB for more information.

Typical Weld Metal Analysis %

Typical Wire Composition %
Al C Cr Cu Fe Mn Mo Ni P S Si Ti W
0.3 % 0.01 % 20 % 0.05 % 0.6 % 0.4 % 16 % 57 % 0.02 % 0.003 % 0.06 % 0.1 % 3.5 %

Related products

  • EXATON NICRMO-4

    NiCrMo-4 is a low carbon nickel-chrome-molybdenum alloy of type alloy C-276. It is a versatile alloy with excellent wet corrosion resistance in oxidizing and especially in reducing media. However, in oxidizing chloride containing environments alloy UNS N06022 (2.4602) is preferred...

  • EXATON 316L

     316L is used for joining stainless CrNiMo and CrNi steels, stabilized or non-stabilized, e.g. ASTM 316, 316L and 316Ti as well as 304, 304L, 321 and 347, used for service temperatures up to 400°C (750°F). It is also used for...

  • EXATON NICR-3

    NiCr-3 is filler material for joining NiCrFe alloys, 9% Ni steels used at cryogenic temperatures, stainless steels to carbon steels, high service temperature NiCu alloys to carbon steels and NiCu alloys to nickel alloys. NiCr-3 can be used in air...