EXATON SX

SX is a filler wire for joining SX steel (UNS S32615, ASME Code Case 2029-3) used in concentrated sulfuric acid. It is used for MIG/MAG welding.

Category:

Description

Typical Tensile Properties

Condition Elongation Tensile Strength Yield Strength
As Welded 55 % 668 MPa (97 ksi) 327 MPa (47 ksi)

Recommended Welding Parameters

Current 230-350 A
Voltage 25-30 V
Wire Diameter 1/16 in.
Wire Diameter 1.6 mm
Wire Feed Speed 118-197 in./min
Wire Feed Speed 3.0-5.0 m/min

Classifications

2
Grade G Z 18 13 L
Name EN ISO 14343-A

Typical Weld Metal Analysis %

Typical Wire Composition %
C Cr Cu Mn Ni P S Si
<=0.018 % 18.5 % 2 % 1.7 % 13.5 % <=0.015 % <=0.005 % 5 %

Related products

  • EXATON 27.7.5.L

    Exaton 27.7.5.L is a hyper-duplex (austenitic-ferritic) filler metal with improved yield strength and better pitting and crevice corrosion resistance compared to super-duplex stainless steels (UNS S32750 and S32760). It also has higher HISC (hydrogen induced stress cracking) resistance compared to...

  • EXATON 309/309L HF

    309/309L HF welding wire is used for MIG/MAG welding. It is particularly suitable for overlay welding and joining dissimilar steels, for example austenitic stainless steels to low alloyed or non alloyed steels. It has excellent resistance to hot cracking due to...

  • EXATON 2209

     2209 is used for welding of duplex stainless steels such as 2205 and 2304. It can also be used for welding of duplex stainless steels to carbon steel. It is used for MIG/MAG welding.