NICKEL & STAINLESS STEEL WELDING CONSUMABLES

Products

  • EXATON 16.5.1

    16.5.1 is a filler material for joining EN 1.4418 and similar steels. It is also used for overlay welding. The weld metal has excellent resistance to cavitation and is used typically for shafts, propellers, pumps and valves in for example,...

  • EXATON 22.12.HT

     Exaton 22.12.HT is an austenitic filler material for welding the high temperature steel grade Sandvik 253 MA*, UNS S30815. It is characterized by high creep strength, good resistance to oxidation and good weldability. It is used for MIG/MAG welding.

  • EXATON 2209

     2209 is used for welding of duplex stainless steels such as 2205 and 2304. It can also be used for welding of duplex stainless steels to carbon steel. It is used for MIG/MAG welding.

  • EXATON 2209LSI

    2209LSi is designed for gas shielded arc welding and particularly MIG welding of duplex stainless steels, such as 2205 and 2304. Its corrosion resistance is equal to ASTM 904L in most applications. It combines high strength with excellent ductility. 2209LSi...

  • EXATON 25.22.2.LMN

    25.22.2.LMn is a manganese alloyed chromium-nickel-molybdenum filler material used for welding UNS S31050 or 1.4466, UNS S31603, 1.4435. The weld deposit has excellent low temperature toughness that makes it suitable for joining stainless steels for cryogenic service. It is used...

  • EXATON 2594

     2594 is used for welding of 2507 and other super-duplex steels. The grade is characterized by excellent resistance to stress corrosion in chloride-bearing environments and excellent resistance to pitting and crevice corrosion. 2594 can also be used for welding 2205 and...

  • EXATON 27.7.5.L

    Exaton 27.7.5.L is a hyper-duplex (austenitic-ferritic) filler metal with improved yield strength and better pitting and crevice corrosion resistance compared to super-duplex stainless steels (UNS S32750 and S32760). It also has higher HISC (hydrogen induced stress cracking) resistance compared to...

  • EXATON 29.8.2.L

    29.8.2.L is used for MIG/MAG welding of the super-duplex grade Sandvik SAF 2906. Typical applications are welding of piping systems in Caustic soda production as well as welding of pipes and heat ex-changers in Alumina production.

  • EXATON 308/308L

     308/308L is used for MIG/MAG welding, and is suitable for joining stainless steels of the 18Cr/8Ni/ELC and 18Cr/8Ni/Nb types for service temperatures up to 350°C (660 F). 308/308L is approved by TÜV-Rheinland for use at cryogenic temperatures down to 4°K...

  • EXATON 308SI/308LSI

     308Si/308LSi is a filler metal particularly suited for MIG/MAG welding. It is suitable for joining stainless steels of the 18Cr/8Ni ELC-type and 18Cr/8Ni/Nb type for service temperatures up to 350°C (660°F).

  • EXATON 309/309L

     309/309L is suitable for joining stainless Cr-Ni steels of the 309 type, Cr-steels and dissimilar steels e.g. austenitic stainless steel to carbon or low-alloyed steels for service up to 320°C (610°F). It is used for MIG/MAG welding. Widely used as...

  • EXATON 309/309L HF

    309/309L HF welding wire is used for MIG/MAG welding. It is particularly suitable for overlay welding and joining dissimilar steels, for example austenitic stainless steels to low alloyed or non alloyed steels. It has excellent resistance to hot cracking due to...

  • EXATON 309LMO

    309LMo is suitable for joining stainless chromium-nickel steels of the ASTM 309 type, chromium steels and dissimilar metals e.g. austemitic stainless steel to carbon or low-alloyed steel. It is used for MIG/MAG welding

  • EXATON 309LNB

    309LNb is a niobium-stabilized overalloyed filler metal suitable for overlay welding of carbon and low alloy steels, where a type 347 of overlay is required. It is used for MIG/MAG welding.

  • EXATON 316L

     316L is used for joining stainless CrNiMo and CrNi steels, stabilized or non-stabilized, e.g. ASTM 316, 316L and 316Ti as well as 304, 304L, 321 and 347, used for service temperatures up to 400°C (750°F). It is also used for...

  • EXATON 316L CRYO

     316L Cryo is a filler material for joining austenitic stainless steels, e.g. ASTM 316, 316L, as well as 304, 304L, for cryogenic applications and meets the requirements of ASME Section VIII, Division 1, UHA 51 ((a) (4) (-a) (-1)) and...

  • EXATON 316LSI

     316LSi is suitable for joining stainless Cr-Ni-Mo and Cr-Ni steels, stabilized or non-stabilized, e.g. ASTM 316, 316L and 316Ti as well as 304, 304L, 321 and 347, for service temperatures up to 400°C (750°F). It is also used for welding...

  • EXATON 317/317L

    317/317L is suitable for joining stainless CrNiMo steels e.g. 317L or similar. It is used for MIG/MAG welding.

  • EXATON 347

    347 is suitable for joining stainless steels of the 18Cr/8Ni/Nb and 18Cr/8Ni/Ti types. Due to the strenghtening effect of niobium, this grade is recommended if the weld metal will be exposed to temperatures above 400°C (750°F). It is used for...

  • EXATON AXT

    Exaton AXT is a filler metal with increased manganese content, reducing the risk for fissuring / hot cracking that otherwise can be a problem in fully austenitic weld metals. It is suitable for joining work-hardenable steels, armor plates, austenitic stainless

  • EXATON NICR-3

    NiCr-3 is filler material for joining NiCrFe alloys, 9% Ni steels used at cryogenic temperatures, stainless steels to carbon steels, high service temperature NiCu alloys to carbon steels and NiCu alloys to nickel alloys. NiCr-3 can be used in air...

  • EXATON NICRCOMO-1

    NiCrCoMo-1 is a nickel-chrome-cobalt-molybdenum alloy of type alloy 617. It has an excellent resistance to high temperature corrosion such as oxidation and carburization. The weld metal provides a combination of excellent metallurgical stability and strength in short and long term...

  • EXATON NICRMO-10

    NiCrMo-10 is a nickel-chrome-molybdenum alloy of type alloy C-22. It is a versatile alloy with excellent wet corrosion resistance in oxidizing and reducing media. It has better overall corrosion resistance than other Ni-Cr-Mo alloys such as alloy UNS N10276 (2.4819)...

  • EXATON NICRMO-13

    NiCrMo-13 is a nickel-chrome-molybdenum alloy of type alloy 59. It is a versatile alloy with excellent wet corrosion resistance for the most demanding applications. It combines excellent corrosion resistance in oxidizing and reducing media, has excellent resistance in chloride containing...

  • EXATON NICRMO-14

    NiCrMo-14 is a nickel-chrome-molybdenum alloy of type alloy 686 and is the highest alloyed of all Ni-Cr-Mo alloys. NiCrMo-14 is used for joining nickel alloy such as UNS N06022 (2.4602), UNS N06059 (2.4605), UNS N10276 (2.4819) and super duplex. The material...

  • EXATON NICRMO-3

    NiCrMo-3 welding wire is suitable for joining nickel-chromium-molybdenum nickel alloys and chromiumnickel-molybdenum steels with very high corrosion resistance in oxidizing, aqueous and high temperature environments such as 6Mo-steels, UNS N06625 (2.4856) and corresponding grades. It is also suitable for joining...

  • EXATON NICRMO-4

    NiCrMo-4 is a low carbon nickel-chrome-molybdenum alloy of type alloy C-276. It is a versatile alloy with excellent wet corrosion resistance in oxidizing and especially in reducing media. However, in oxidizing chloride containing environments alloy UNS N06022 (2.4602) is preferred...

  • EXATON NIFECR-1

    NiFeCr-1 welding wire is suitable for overlay welding when a deposit with chemistry corresponding to UNS N08825 is required. The weld deposit is a nickel-iron-chromium-molybdenum-copper alloy suitable for use in extremely corrosive environments. NiFeCr-1 has very good resistance to stress corrosion...

  • EXATON SX

    SX is a filler wire for joining SX steel (UNS S32615, ASME Code Case 2029-3) used in concentrated sulfuric acid. It is used for MIG/MAG welding.